02/10/1
XL_45H_H_E1.fm
E-6
ENGLISH
XL-45H
8
7
6
5
4
3
2
1
Prep
aration f
o
r Us
e
Aerial connection
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
Caution:
z
Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
z
Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
Placing the speaker system:
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
Connecting the AC power lead
After checking all the connections, connect the AC power lead to the
AC power input socket, then plug the AC power lead of this unit into
the wall socket.
Notes:
z
Unplug the unit if it is not to be used for a prolonged period of
time.
z
Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
To turn the power on
Press the ON/STAND-BY button to turn the power on.
To set the unit to the stand-by mode:
Press the ON/STAND-BY button again.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial wire
in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the LOOP
socket. Position the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
External FM aerial
z
Do not let the bare speaker wires touch
each other.
Incorrect
