Sharp XL-DH10NH, Operation Manual

04/1/28

XL-DH10N 20H_001 EN

E-4

9

8

7

6

5

4

3

2

1

9

System connections

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.

External FM aerial:

Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.

Supplied AM loop aerial:

Connect the AM loop aerial to the AM terminal. Position
the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall
with screws (not supplied).

Note:

Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.

The iPod with photo and video can be viewed by
connecting to a TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO
OUT socket on the rear of the unit.

Note:

Please make sure to set iPod unit to either NTSC or PAL
to match your TV signal. Please visit Apple’s home page
for further information.

After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket. If you plug in the unit first, the unit will enter the
stand-by mode.

Note:

Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.

Make sure to unplug the AC power lead before making any connections.

Right speaker

FM aerial

(not supplied)

To video 
input socket

(not supplied)

screws

wall

< Attaching to the wall >

< Assembling >

AM loop aerial

Wall socket

(AC 220 - 240 V ~ 50/60 Hz)

Installing the AM loop 

aerial

Video cable 

Black

Red

Left
speaker

TV

■

Aerial connection

■

Speaker connection

●

Connect the black wire to the minus 
(–) terminal, and the red wire to the 
plus (+) terminal.

●

Use speakers with an impedance of 
6 ohms or more, as lower 
impedance speakers can damage 
the unit.

●

Do not mistake the right and the left 
channels. The right speaker is the 
one on the right side when you face 
the unit.

Incorrect 

●

Do not let the bare speaker wires touch each other.

●

Do not allow any objects to fall into or to be placed in the
bass reflex ducts.

●

Do not stand or sit on the speakers. You may be injured.

■

Connecting iPod to a TV

■

AC power connection