Sharp XL-DH10NH, Operation Manual

04/1/28

XL-DH10N 20H_001 EN

E-16

9

8

7

6

5

4

3

2

1

9

Using the Radio Data System (RDS) (continued)

If any of the following events occur, it does not mean
that the unit is faulty:

●

“PS”, “NO PS” and a station name appear alternately,
and the unit does not operate properly.

●

If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.

●

When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.

●

“NO PS”, “NO PTY” or “NO RT” will flash for about 5
seconds, and then the frequency will be displayed.

Notes for radio text:

●

The first 8 characters of the radio text will appear for 4
seconds and then they will scroll across the display.

●

If you tune in to an RDS station which is not
broadcasting any radio text, “NO RT” will be displayed
when you switch to the radio text position.

●

Whilst radio text data is received or when the text
contents change, “RT” will be displayed.

To specify programmed types and select stations
(PTY search):

You can search a station by specifying the programme
type (news, sports, traffic programme, etc. ... see page 17)
from the stations in memory.

Notes:

●

If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about 4
seconds, and then the station name will remain it.

●

If you want to listen to the same programme type of
another station, press the RDS PTY button and start
again from step 2. The unit will look for the next station.

■

Notes for RDS operation

■

To recall stations in memory

1

Press the TUNER (BAND) button on the remote control
or FUNCTION button on the main unit repeatly to
select TUNER function.

2

Press the RDS PTY button on the remote control.

Selected PTY code (blinking) will appear for about 6
seconds.

3

Within 6 seconds, press the 

 or 

 button to select

the PTY code.

Each time the button is pressed, the PTY code will
appear.

4

Whilst the selected PTY code is displayed (within 6
seconds), press the RDS PTY button again.

●

The unit searches the all preset stations and stops
when it finds a station of the selected category then
tunes into the stations. The RDS indicator lights up.

●

If no programme is found in the all preset stations,
“NONE” appear on the display and returns to the
previous station.