E-4
EN
■
Aerial connection
Supplied FM aerial:
Connect to the FM 75 ohms socket and position it where
reception is best.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. Disconnect the supplied FM aerial wire
before use.
Note:
Keep the aerial away from the unit or AC power lead to
avoid noise pickup.
■
Speaker connection
+ speaker terminal
red wire
- speaker terminal
black wire
●
Use speakers with an impedance of 6 ohms or more,
as lower impedance speakers can damage the unit.
●
Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
●
Do not let the bare speaker
wires touch each other.
●
Do not allow any objects to fall
into or to be placed in the bass
reflex ducts.
●
Do not stand or sit on the
speakers. You may be injured.
Incorrect
■
Eco mode
●
The first time the unit is plugged in, it will enter the
Eco mode.
●
To cancel the Eco mode, press the ECO button (re-
mote control) during power standby mode. The unit will
enter the Demo mode.
●
To return to the Eco mode, press the ECO button again.
■
AC power connection
After all connections have been made correctly, plug the
AC power lead into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Make sure to unplug the AC power lead before making any connections.
System connections
FM
aerial
Right speaker
Red
Installing the
supplied FM
aerial
Black
To left
speaker
Wall socket
(AC 100 - 240 V
~ 50/60 Hz)
