Sharp XL-LS701H, Operation Manual

E-12

EN

Using the Radio Data System (RDS) 

(continued)

3 

Within 6 seconds, press the TUNING (

 or 

) 

button to select the programme type.

Each time the button is pressed, the programme type will 

appear. 

4 

While the selected programme type is flashing (within 

6 seconds), press the RDS PTY button again.

After the selected programme type has been lit for 2 sec-

onds, “SEARCH” will appear, and the search operation will 

start.

Notes:

●

If  the  display  has  stopped  flashing,  start  again  from 

step 2. If the unit finds a desired programme type, the 

corresponding channel number will lit for about 8 sec-

onds, and then the station name will remain lit.

●

If you want to listen to the same programme type of 

another station, press the RDS PTY button while the 

channel number or station name is flashing. The unit 

will look for the next station.

●

If no station can be found, “Not Found” will appear for 

4 seconds.

If you select the traffic programme:

If  you  select  the  traffic  programme  (TP)  in  step  3,  “TP” 

will appear.

(This does not mean that you can listen to the traffic infor

-

mation at that time.)

When the traffic information is broadcast, “TA” will appear.

Descriptions of the PTY (Programme Type) codes, TP 

(Traffic Programme) and TA (Traffic Announcement)

NEWS

POP M

SOCIAL

FOLK M

AFFAIRS

ROCK M

RELIGION

DOCUMENT

INFO

EASY M

PHONE IN

TEST

SPORT

LIGHT M

TRAVEL

ALARM

EDUCATE

CLASSICS

LEISURE

NONE

DRAMA

OTHER M

JAZZ

TP

CULTURE

WEATHER

COUNTRY

TA

SCIENCE

FINANCE

NATION M

VARIED

CHILDREN OLDIES

Timer and sleep operation (Remote 

control only)

Timer playback:

The unit turns on and plays the desired source (CD, 

TUNER, USB, AUDIO IN) at a preset time.

This unit has 2 types of timer: ONCE TIMER and DAILY 

TIMER.
Once timer (“ ” indicator):

Once timer play works for one time only at a preset time.

Daily timer (“DAILY” indicator):

Daily timer play works at the same preset time every day 

that we set. For example, set the timer as a wake-up call 

every morning.

Using the once timer and daily timer in combination:

For  example,  use  the  once  timer  to  listen  to  a  radio 

program, and use the daily timer to wake up.

1 

Set the daily and once timer (pages 12 - 13).

1 minute or more

Daily timer

Once timer

Stop

Start

Start

Stop

■

Timer playback

Before setting timer:

●

Check that the clock is set to the correct time (refer to 

page 6). If it is not set, you cannot use the timer function.

●

For timer playback: Plug in USB or load discs to be 

played.

1 

Press the ON/STANDBY button to turn the power on.

2 

Press the TIMER button.

3 

Press the 

 or 

 button to select “Once” or 

“Daily”, and press the ENTER button.

4 

Press the 

 or 

 button to select “Timer 

Set”, and press the ENTER button.

5 

To select the timer playback source (CD, TUNER, 

USB, AUDIO IN), press the 

 or 

 button. 

Press the ENTER button.

When you select the tuner, select a station by press-

ing the 

 or 

 button, and then press the 

ENTER button. If a station has not been programmed, 

“No Preset” will be displayed and timer setting will be 

cancelled. To memorise a station, refer ‘Memorising a 

station’ on page 10.

6 

To adjust the day, press the 

 or 

 button 

and then press the ENTER button.

7 

Press the 

 or 

 button to adjust the hour, 

and then press the ENTER button.

8 

To adjust the minutes, press the 

 or 

button and then press the ENTER button.

9 

Set the time to finish as in steps 7 and 8 above.

10 

To adjust the volume, press the 

 or 

 but-

ton and then press the ENTER button. 

11 

Press the ON/STANDBY button to enter the power 

standby mode. “TIMER” indicator lights up.