03/8/20
XL-MP45H(H)E1.fm
E-6
ENGLISH
8
XL-MP45H
TINSZ0227SJZZ
Prepar
ation for
Use
!
Aerial connection
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
!
Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Caution:
Placing the speaker system:
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
!
Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Notes:
"
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
"
Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
!
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial wire
in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
< Assembling >
< Attaching to the wall >
Wall
Screws
(not
supplied)
External FM aerial
"
Use speakers with an impedance of 4 ohms
or more, as lower impedance speakers can
damage the unit.
"
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
"
Do not let the bare speaker wires touch
each other.
Incorrect
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
