background image

03/8/20

XL-MP45H(H)E2.fm

E-16

ENGLISH

8

XL-MP45H

TINSZ0227SJZZ

Radio

Listening to the memorised station

!

Memorising a station

You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)

Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.

!

To recall a memorised station

 

!

To scan the preset stations

The stations saved in memory can be scanned automatically. (Pre-
set memory scan)

 

!

To clear a memorised station

 

!

To erase entire preset memory

1

Perform steps 1 - 3 in "Listening to the radio" on page 15.

2

Press the MEMORY/SET (MEMORY)
button to enter the preset tuning sav-
ing mode.

3

Within 30 seconds, press the PRE-
SET (  or  ) button to select the pre-
set channel number.

Store the stations in memory, in order, starting with preset 
channel 1.

4

Within 30 seconds, press the MEMO-
RY/SET (MEMORY) button to store
that station in memory.

If the "MEMORY" and preset number indicators go out before 
the station is memorised, repeat the operation from step 2.

5

Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.

When a new station is stored in memory, the station previously 
memorised will be erased.

Press the PRESET (  or  ) button for less than 0.5 seconds to
select the desired station.

 

Preset channel

 

Frequency and frequency band

 

1

Press the PRESET (  or  ) button for more than 0.5 sec-
onds.
The preset number will flash and the programmed stations will 
be tuned in sequentially, for 5 seconds each.

2

Press the PRESET (  or  ) button again when the desired
station is located.

1

Recall the memorised station.

2

Whilst it is displayed, press the MEMO-
RY/SET (MEMORY) button.

3

Within 30 seconds, press the CLEAR 
button on the remote control.

1

Press the ON/STAND-BY button to 
enter the power stand-by mode.

2

Whilst pressing down the MEMORY/
SET button and the FUNCTION but-
ton, press the ON/STAND-BY button 
until "TUNER CL" appears.

Summary of Contents for XL-MP45H








































Reviews: