XL-S10H
2 – 2
[2] TEST MODE
Test Mode Key Operation
All test modes can be terminated by turning off the power with POWER key.
•
Preset clear test
All tuner preset stations are cleared.
•
Preset set test
Stations are set according to destination.
•
Display test
When test mode is activated, the entire display lights up. As the “PLAY” button is pressed, half of the display lights up alternately.
•
CD test
In step 5, hold down the AUX button on the remote control. The tracking servo is switched on/off.
From step 3, the pick up can be moved with the FF/REW button.
•
Soft reset test
All data in RAM is cleared.
•
VOLUME test
Starting from level 23 (default), check all the levels (0 - 23 - MAX).
•
TIMER test
Start the timer at 1:00. When it reaches 1:05, turn on the power with the AUX function and turn off the power after about 30 seconds.
(In the test mode, fade-in and fade-out are not required.)
•
ALL KEY test
In the test mode, hold down all the buttons on the main unit and then press the “POWER” button. “OK” appears.
If only the “POWER” key is pressed, “ERROR” appears.
KEY1
KEY2
KEY3
TEST CONTENTS
INDICATION
Memory
Preset Down
Power
Preset clear
Tu CL
Memory
Stop
Power
Preset set
FM P-01
Memory
Play
Power
Display
Memory
Preset up
Power
CD
T-1
Memory
Clear
Power
Soft reset
CL
Bass/treble
Preset down
Power
Volume
T-3
Bass/treble
Play
Power
Timer test
T-4
Bass/treble
Clear
Power
all key
T-6
September 12 Days Indication Change
CH
BAND
FREQUENCY
1
FM STEREO
FM 87.50 MHz
2
FM 108.00 MHz
3
FM 98.00 MHz
4
FM 90.00 MHz
5
FM 106.00 MHz
6
AM
AM 522 kHz
7
AM 1620 kHz
8
AM 990 kHz
9
AM 603 kHz
10
AM
AM 1404 kHz
11
——————
·
·
35
36
FM MONO
FM 106.00 MHz
37
FM 90.00 MHz
38
FM 98.00 MHz
39
FM 108.00 MHz
40
FM 87.50 MHz
CH
BAND
FREQUENCY
[cd step 1] Enter test mode.
←
———————
↓
Hold down the “memory” button
[cd step 2] After some steps, the laser turns on.
↓
Hold down the “memory” button
[cd step 3] After some steps, focus search is performed.
↓
Hold down the “memory” button
[cd step 4] After some steps, CLV rotation is performed.
↓
Hold down the “memory” button
[cd step 5] CD playback starts.
↓
Hold down the “stop” button to return to [cd step 1] ––––––––––
