E-21
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
USB Memory Playback
Listening to USB mass storage device /
MP3 Player (continued)
Note:
To pause playback:
Press the USB
button.
Auto power off function:
In the stop mode of USB operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
To remove USB memory device
Notes:
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
USB cable is not recommended for use in this audio system to
connec
t
to USB memory device. Use of the USB cable will
affect the performance of this audio system.
This USB memory cannot be operated via USB hub.
If “NO SUPPORT” is displayed, it means “Copyright protected
WMA file” or “Not supported playback file” is selected.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
External HDD-storage cannot be played back via USB terminal.
If the data inside the USB memory is large, it may take longer time
for
the
data to be read.
2
Press the FOLDER button, and press the TUNING ( or )
button to select desired playback folder.
To start playback with folder mode on, go to step 4.
To change the playback folder, press the TUNING ( or )
button to select another folder.
3
Select desired file to be played back by pressing the
or
button.
4
Press the /
(USB
/ ) button.
Playback will start and the file name will be displayed.
Title, Artist & Album name are displayed if they are recorded in
the USB memory device.
Display content can be changed by pressing the DISPLAY button.
(
) Only appears when clock is already set.
FOLDER indicator
Total files in Folder 2
FOLDER number
File Name Display
Title Display
Function Display
Artist Display
( •
TITLE-1 Indicator
( •
TITLE-2 Indicator
Clock Display
Album Display
( •
TITLE-3 Indicator
( )
1
Press the USB button to stop playback. Then press the
USB button again and wait until “UNPLUG OK” is
displayed.
2
Disconnect USB memory device from the USB terminal.