E-29
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Using the Radio Data System (RDS) (continued)
Notes:
The same station name can be stored in different channels.
In a certain area or during certain period, the station names may
temporarily be different.
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty:
“PS”, “NO PS” and a station name appear alternately, and the unit
does not operate properly.
If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work
properly.
When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
“NO PS”, “NO PTY” or “NO RT” will flash for about 5 seconds, and
then the frequency will be displayed.
Notes for radio text:
The first 10 characters of the radio text will appear for 4 seconds
and then they will scroll across the display.
If you tune in to an RDS station which is not broadcasting any
radio text, “NO RT” will be displayed when you switch to the radio
text position.
Whilst radio text data is received or when the text contents
change, “RT” will be displayed.
To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 30 - 31) from the stations
in the memory.
1
Press the TUNER (BAND) button to select the FM.
2
Press the RDS PTY button on the remote control.
“SELECT” and “PTY TI” will appear alternately for about 6 sec-
onds.
3
Within 6 seconds, press the PRESET ( or ) button to se-
lect the programme type.
Each time the button is pressed, the programme type will ap-
pear. If the button is held down for more than 0.5 seconds, the
programme type will appear continuously.
4
Whilst the selected programme type is flashing (within 6
seconds), press the RDS PTY button again.
After the selected programme type has been lit for 2 seconds,
“SEARCH” will appear, and the search operation will start.