E-37
ENGLISH
XL-UR2110H
XL-UR250H
XL-UR230H
Advanced Features
Enhancing your system (continued)
Subwoofer connection
When a commercially available subwoofer with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
CD player
Subwoofer with a
built-in amplifier
SUBWOOFER
PRE-OUT
Symptom
Possible cause
The clock is not set to the
correct time.
Did a power failure occur? Reset
the clock. (Refer page 11)
When a button is pressed,
the unit does not respond.
Set the unit to the power stand-
by mode and then turn it back on.
If the unit still malfunctions, reset
it. (Refer page 38)
No sound is heard.
Is the volume level set to “0”?
Are the headphones connected?
Are the speaker wires discon-
nected?
Symptom
Possible cause
Playback does not start.
Is the disc loaded upside down?
Playback stops in the
middle or is not performed
properly.
Does the disc satisfy the
standards?
Is the disc distorted or
scratched?
Playback sounds are
skipped, or stopped in the
middle of a track.
Is the unit located near excessive
vibrations?
Is the disc very dirty?
Has condensation formed inside
the unit?