7
Getting Started
1
4.
Replace the cover.
5.
Set the battery replacement switch back to NORMAL
OPERATION (the red dot disappears).
The Organizer will not function unless the battery
replacement switch is in the NORMAL OPERATION
position.
Initializing
The Organizer must be initialized when it is used for the first
time.
1.
Press and hold the
key.
2.
While holding down the
key, push the RESET button
on the bottom of the Organizer using a pen or some other
pointed object. The following message will appear.
3.
Press
to initialize the Organizer.
The Select Language screen then appears.
4.
Press 1, 2, 3 or 4 to select the desired display language.
Or move the cursor to choose and press
when you
have finished.
5.
Or you can press
to initialise the Organizer rather
than to select the display language.
Once you have selected a display language, you cannot
switch to another display language unless you initialize
the Organizer once again.
The message Working... Please wait. appears while the
Organizer proceeds with the initialization procedure.
The Welcome message then appears.
Setting up the Organizer after Initialization
The Organizer takes you through the various steps needed to
set up the Organizer before use. These steps are described
below. We strongly recommend that you complete the entire
set up procedure before starting to actually use your Organizer.
*
Welcome messages and instructions
*
Setting the display contrast
*
Setting the clock
Welcome messages and instructions
After pressing
to confirm initializing the unit, the Organizer
displays the following welcome message, briefly outlining its
functions.
Summary of Contents for ZQ-700
Page 1: ......
Page 31: ...Time Management 30 30 30 30 30 ...
Page 51: ...Features and Utilities for Added Power 50 50 50 50 50 ...
Page 55: ...Data Transfer 54 54 54 54 54 ...