5
Printed in China.
10
FEET
10
FEET
10 FEET
5 FEET
10 FEET
OPERATING DRONE
Step 1 – Pre-Flight Checklist
• Read all warnings and instructions.
• Install remote batteries, page 2.
• Charge batteries, page 3.
• Make sure that drone and remote are powered off.
Step 2 – Choosing a location
• Drone is designed to be flown/driven indoors
and outdoors.
• Always make sure you have enough space to
fly drone.
• Always follow warnings, page 1.
Step 3 – Driving Mode
1. Turn the drone and remote on then place the drone on a hard flat surface and
allow to sit for 4 seconds.
Step 4 – Lift Off
1. Bring the car to a stop.
ALIGN
TAKE OFF/LAND
SPIN TRIM
B
F
L
R
ALIGN
TAKE OFF/LAND
SPIN TRIM
B
F
L
R
2. Pair remote to drone:
Bring the Throttle all the way
up then bring it all the way
down, remote will beep
once paired.
3. Use the right joystick to move
the car forwards, backwards
and turn left or right.
2. Press TAKE OFF/LAND button OR slowly press the Throttle
Joystick stick up. Drone will begin to elevate. You can compensate
for some of the drone’s drifting by using the Multi Directional Button
or by following step 5. You may need to practice this step several
times before successfully getting drone into the air.
Note: After pair is successful, keep the throttle in center to enter driving mode.
After pair is successful, you can enter flying mode by following step 4 (shown below).
Fly+Drive Drone — 5-inch
