TV Wireless Headphones
Item No. 203787
QUICK START GUIDE
Congratulations on selecting
TV Wireless Headphones
from Sharper Image. This Quick Start Guide
is designed to help you set up your new device. Please read the full instruction sheet at a later time
and keep it for future reference.
Please note:
Your TV Wireless Headphones must be fully charged before you use them for the first
time. This may take up to 16 hours.
PACKAGE CONTENTS
• Base Unit
• Wireless Headphones
• 3.5mm stereo cable
• 3.5mm-to-RCA stereo cable
• AC/DC power adapter
CONNECTING THE BASE TO THE AC OUTLET
• Connect the power adapter into
DC5V jack
in the back of the base unit.
• Plug the power adapter into an AC outlet.
CONNECTING THE BASE TO YOUR TV
There are two ways to connect the base to your TV. Be sure to use
only one method
or you could
damage your device.
Headphone input
. Use the supplied 3.5mm black audio cable. Insert one end into the
Audio Input
jack
on the back of the base. Plug the other end into the 3.5mm headphone jack on your TV.
Audio input:
Use the supplied 3.5mm-to-RCA cable. Connect the 3.5mm end to the
Audio Input
jack on the back of the base. Connect the red and white plugs to the corresponding red and white
audio out jacks on your TV. (Make sure the red plug is connected to the red jack and the white plug
is connected to the white jack.)
CHARGING YOUR HEADPHONES
• Rest the headphones on the base so the charging pins connect with the charging dock on
the bottom of the left earcup.
• While the headphones are charging, the red
Charge
light will be lit. Make sure it is solid red,
not flickering or flashing. The red light will go out once the headphones are fully charged.
Note:
If the red light is flickering or flashing, adjust the headphones to make a better connection.
