- 2 -
4. On the transmitter, make sure all the trimmer arrows are pointed to the center. Make sure the
speed switch is set to LOW (“-”).
5. Switch on the transmitter.
6. Pull the LEFT stick to the LOWER LEFT corner and the RIGHT stick to the LOWER RIGHT corner
simultaneously. After 3 seconds, the LEDs on the drone head will flash, indicating that pairing is
complete and you are ready to fly.
7. Slowly lift off by raising the LEFT stick (throttle). The LED will illuminate steadily.
NOTE: This pairing procedure must be performed every time the drone is turned on.
NOTE: Your Quad Smart Drone has many advanced features, including adjustable speed and one-
button 360° flips. Please read the full User’s Guide to get the most fun and enjoyment from your
drone.
WARNING: Please exercise caution and common sense when you operate this drone. Improper use
of this product can result in serious injury, property damage or damage to the product. It is your
responsibility to comply with all applicable laws pertaining to remote controlled and unmanned
aerial vehicle flight regulations.
STEP 3: PAIRING THE TRANSMITTER AND DRONE [CONT.]
The Sharper Image® name and logo are registered trademarks.
Manufactured and marketed by Camelot SI, LLC under license.
©Sharper Image All Rights Reserved.
Sharper Image branded drones and RC quadcopters purchased
from SharperImage.com include a 90-day limited replacement
warranty. If you have any questions, please call Customer Service
at 1 (877) 210-3449.
CUSTOMER SERVICE / WARRANTY
