- 3 -
CLEANING AND MAINTENANCE
SAFETY WARNINGS
•
Drain water when not in use or if water becomes cloudy.
•
Before draining water or cleaning the unit, turn the power off and unplug it from the AC outlet.
•
Always drain water from the drainage hose. Do not pour water over the control panel.
•
Clean the unit with a soft cloth and mild soap. Do not use strong abrasives, detergents
or cleaning agents.
•
Do not immerse the device in water or under a shower.
•
Make sure the unit is clean and dry before storing.
•
Store in a clean, dry and cool place.
•
CAUTION: This device can produce very hot water. Please set the heat on a low setting,
then gradually increase the temperature to a comfortable level.
•
Do not leave this device unattended.
•
Do not allow children to use or play with the device. Keep this device out of the reach
of children.
•
Do not attempt to stand in this device.
•
Turn off the power and unplug the device when not in use.
•
Do not use this device if you have open wounds or sores on your feet or legs.
•
If you begin to feel faint or overheated, discontinue use immediately.
•
Consult your doctor prior to use if you have heart disease, a pacemaker or if you are pregnant.
•
Do not use this device if the power cord appears damaged or frayed. Contact Sharper Image
Customer Service Immediately.
OPERATION (CONT’D)
7. Use the Surf/Heat button to turn the bubbles and heat on or off.
8. Use the Auto-Roller button to turn the massage rollers on or off.
9. Use the Temp. + and Temp. – buttons to adjust the water to the desired temperature.
NOTE: This unit does not have a cooling element, so the water temperature will
decrease gradually.
10. Sit in a chair and place your feet in the tank. Do not attempt to stand in the unit.
NOTE: Always check temperature of the water before placing your feet into the device.
11. Press the Timer button to set the automatic shutoff timer. Select the desired
time (10-60 minutes).
12. When you are finished, unplug the device. Place the cover on the tank if you wish to
reuse the water.
13. To drain the tank, position the drainage hose over a suitable drain. Open the hose to
drain the water.