- 2 -
AC OUTLET
CAR CHARGER
CLEANING/MAINTENANCE
TROUBLESHOOTING
SAFETY AND MAINTENANCE ISSUES
lnput:100-240vac 50/60hz 1.6a | Output: dc 12v
Insert the power plug into the device then plug the power plug
into a AC outlet.
Connect the car charger socket into the massager and then insert
the charger into your vehicle’s cigarette outlet.
1. Unplug the device after use and let cool before cleaning.
2. Use a wet cloth to clean off any dust and dirt on the device.
3. Do not use corrosive cleaners such as benzene or thinner to clean this device.
4. Do not use a wet cloth to clean the control panel. It can cause damage and failure.
Use only a dry cloth to wipe the control panel.
5. If the device will not be used for an extended amount of time, wipe clean, and place in a
ventilated and dry place.
If you have problems not mentioned in the list, you should try the following steps.
• Turn the power off and unplug the power plug from the socket.
• Turn the device off for 60 minutes.
• Insert the plug into the power socket and open the switch.
• If the problem persists, please contact Sharper Image Customer Service.
1. IMPORTANT SAFETY WARNINGS
• Do not allow any damaging items to enter the clearance between the massage head
and the casing.
• Do not allow the product to come into contact with water.
• If the main cable or plug is damaged do not disassemble and attempt to repair it by yourself.
Please contact Sharper Image.
• Disconnect the product from the main supply after use or before cleaning to avoid
damage to the equipment or personal injury.
• Do not use any spare parts and attachments other than those recommended.
• Do not use this product if you are under the influence of alcohol or not feeling well.
• Do not keep this product on for more than 15 minutes to avoid overheating and injury.
• Do not use this product within one hour of eating.
