Printed in China.
3
Replacing Propellers
1. Pull firmly to remove broken propeller. Replace
with a new one. Push firmly and carefully.
2. Replace propellers by following the diagram on
the right.
3. Each blade spins differently. Blade A1 turns
clockwise and Blade B1 turns counter
clockwise.
Connect the Charge
Cable to the Drone
CHARGING BATTERY
Note: The charging light on the drone will light up
when it is charging and turn off when fully charged.
Charge time is approximately 120 minutes.
1. Turn off the drone before charging.
2. Connect the Battery Charger Cable to the port
found on the rear of the drone.
3. Connect USB connector to the power source.
Drone Air Racer
A1
A1
B1
B1
