Sharper Image Drone Air Racer, Manual

5

Printed in China.

OPERATING DRONE

Step 1 – Pre-Flight Checklist

•  Read all warnings and instructions.

•  Install remote batteries, page 2.

•  Charge batteries, page 3.

•  Make sure that drone and remote are powered off.

Step 2 – Choosing a location

•  Drone is designed to be flown/driven indoors and outdoors.

•  Always make sure you have enough space to fly drone.

•  Always follow warnings, page 1.

Step 3 – Driving Mode

1. Turn the drone and remote on then place the drone on a hard 

flat surface and allow to sit for 4 seconds.

2. Slowly and carefully press the Throttle 

Joystick up. Drone will begin to elevate. 

You can compensate for some of the 

drone’s drifting by using the Multi 

Directional Button or by following step 5. 

You may need to practice this step 

several times before successfully getting 

drone into the air. 

Step 4 – Lift Off

1. Bring the car to a stop.

Drone Air Racer

2. Pair remote to drone: 

Bring the Throttle all the 

way up then bring it all 

the way down, remote 

will beep once paired.

3. Use the Multi Directional 

Joystick to move 

forwards, backwards or 

turn left and right.

Note: After pair is successful, keep the throttle down all the 

way, to enter driving mode.

After pair is successful, you can enter flying mode by 

following step 4 (shown below)

10

 FEET

10

  FE

ET

10 FEET

5 FEET

10 FEET