background image

6

Printed in China.

Use the Throttle Joystick 

to increase or decrease 

your elevation.

Use the Multi Directional 

Joystick to move 

forwards, backwards or 

turn left and right.

Lower drone to 20 feet or less then press the Auto 

Land button. Use the Multi Directional Joystick to 

maneuver drone. Press the Auto Land Button a second 

time to deactivate auto land.

Turn off your remote by rotating the ON/OFF Button.

Align Button

Drone Air Racer

OPERATING DRONE (Cont.)
Step 5 – Operating Drone in Flight

Follow this step if your drone begins to drift while take off or 

during flight.

F. Drone drifts backwards: Press the Forward Adjustment Button.

B. Drone drifts forwards: Press the Backwards Adjustment Button.

L. Drone drifts right: Press the Left Adjustment Button.

R. Drone drifts Left: Press the Right Adjustment Button.

SPIN TRIM

Drone spin to clockwise automatically: Press the left spin trim 

adjustment button

.

Drone spin to counter clockwise automatically: Press the right 

spin trim adjustment button.

Step 6 – Landing Drone

•  Make sure you have achieved level, balanced flight, where the 

drone is neither climbing nor descending.  This mode allows 

you to safely and slowly land your drone without having to 

control the speed.

•  The ideal auto landing height is 20ft.

•  Press the land button to trigger auto land.  Remote will beep 

continuously and the button will be light on until you exit the 

auto land mode.

•  To steer the drone during landing, use the right control until 

drone has reached the ground.

•  Press the land button again to exit auto landing mode.

•  For any urgency stop, press the Land button and hold on until 

the power cut off and blades stop spinning.

Step 7 – Retrieving Drone

1. Turn off your remote by rotating the ON/OFF Button. This will 

stop you from accidentally turning the propellers on.

2. Make sure the propellers have stopped spinning then pick up 

your drone. 

Note: You will need to pair your drone again before your next flight.

Align

Press the Align Button to turn Align mode ON and then again to 

turn off. The button will be light on when in Align mode.

In this mode, the drone will always move in the direction you press 

the Multi Directional Button no matter which way the drone faces.

Tips

•  Do not crash drone into sand or dirt.                                    

Drone gears may become clogged.

•  When first learning to fly, practice lifting off and hovering. 

•  Stay several feet from walls and buildings.

LEFT SPIN TRIM

RIGHT SPIN TRIM

Summary of Contents for Drone Air Racer









Reviews: