Installing Batteries
4....Press.the
button..The.LED.
should.illuminate..If.it.doesn‘t,.
check.the.batteries.and.try.again..
Entering a Code Manually
1....Turn.on.the.device.(TV,.VCR,.
DVD,.SAT,.CAB,.AUD).you.wish.to.
program.manually..
2....Use.the.code.tables.in.the.back.
of.this.manual.to.locate.the.list.of.
codes.for.the.brand.name.of.the.
device.you.wish.to.program.
3....Press.and.hold.the.button.for.the.
device.you.wish.to.program.(TV,.
VCR,.DVD,.SAT,.CAB,.AUD).for.
more.than.three.seconds;.the.red.
LED.will.illuminate..This.indicates.
that.the.remote.control.is.ready.to.
accept.a.3-digit.code..
4....Within.30.seconds,.enter.the.
3-digit.code.listed.for.your.brand.
of.device;.the.LED.shuts.off..This.
indicates.that.the.remote.control..
is.programmed..
5....Press.the.
On/OFF
.Button.to.verify.
correct.code.entry..If.the.device.
shuts.off,.no.further.programming.
is.required.
6
Summary of Contents for EW001
Page 1: ...Soft Touch 6 In 1 Wireless IR Remote EW001 Instructions Read and save these instructions ...
Page 34: ......
Page 35: ......