FINAL CHECK:
STEP 9:
Your remote control should
come already attached to
the chair body. Remove
the plastic wrapping from
the remote control and
place it in the remote
holder located on the right
arm of the chair.
9
Power cord port
Main power
switch
STEP 8:
Connect the chairs power
cord to a grounded 110V
electrical outlet and plug
it into the respective port
on the back side of the
base of the chair. Flip the
main power switch on.
8
5
STEP 5:
Using your foot as a support, lean the chair backwards towards you
to tip it up onto the wheels built into the base. Make sure not to tip
the chair too far back.
Wheel chair this way
Place foot here
Wheels
Place hands
here
6
STEP 6:
Remove the protective covering from the arm panels. Position arm
panels on corresponding side of the chair, ensuring that the lip of the
arm panel faces towards the front of the chair.
Right arm panel
Left arm panel
Arm panel lip
STEP 7:
To attach the arm panels, align the connectors on the arm panels with
the sockets on the chair body. Push firmly to connect into place.
7
Arm panel
connectors
Chair body sockets
Review chair for smooth operation. If things are not operating
correctly, review all assembly steps. Call Sharper Image
support at 888-894-9150 if you need live US-based support.
You are done; time for a Massage!
Power on the
remote and
select a program
to start a session.
SCAN CODE
Register your product at
www.sharperimagemassagechairs
.com/warranty/registration
to ensure it is in our system.
This will simplify the warranty process should you ever need it.
Alternatively,
scan the QR code
to go directly to the URL above.
