Button Action
Result
Short press +
Increase volume
Long press + (for 2 seconds)
Skip to the next track
Short press -
Decrease volume
Long press - (for 2 seconds)
Go back to the previous track
CONTROLLING THE LAMP
• Hold the LED controller for 2 seconds to turn the lamp on.
• Hold the LED controller for 2 seconds to turn the lamp off.
• Slide your finger across the dots on the LED controller to increase or decrease the
brightness.
• Hold your finger on the LED controller (for about 5 seconds) to activate Sleep Mode.
The lamp will dim, indicating that Sleep Mode has been activated. When the lamp is in
Sleep Mode, the lamp will turn off automatically in 30 minutes.
WIRELESS CHARGING
• This device is compatible with Qi wireless charging-enabled smartphones.
• Place your Qi wireless charging-enabled smartphone on the wireless charging pad.
• Your device will begin to charge immediately.
• While your device is charging, the indicator light on the charging pad will turn blue.
PAIRING THE BLUETOOTH SPEAKER
• Press the Power button until the Bluetooth indicator flashes and makes the low-pitched
“disconnected” notification sound.
• Turn on the Bluetooth function of your smartphone and select “Home Tree.”
• When your device is paired successfully, you will hear the high-pitched “connected”
notification sound.
• Tap the top of the device to make the touch-sensitive buttons (“+” and “-”) appear.
• Use the touch-sensitive buttons to control the volume and tracks as follows:
NOTE:
The blue indicator lights will turn off if they are not used in 30 seconds.
- 3 -
SPECIFICATIONS
Wireless charge
5V, 1A
Brightness
200 lumen
Output voltage
5V
Max. output current
800mA
Wireless charging conversion rate
70%-75%
Bluetooth version
V4.0
Bluetooth frequency
2.4 GHZ
Bluetooth profile
A2DP, AVRCP
