13
English
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTION
PROBLEM
Unit fails to heat up. Unit is not plugged in. Plug power cord into electrical
outlet.
Household circuit breaker / ground fault interrupter has
tripped or blown a fuse. Reset circuit breaker / ground
fault interrupter, or replace fuse. For assistance, contact
a licensed electrician.
Unit is damaged or in need of repair. Immediately cease
usage and unplug. Contact Consumer Service for
assistance.
No water in Water Tank. Refer to
FILLING WATER TANK
procedure on Page 10 to refill Water Tank.
Steam output
is weak or
intermittent.
Water level in Reservoir is running low. Refer to
FILLING
WATER TANK
procedure on Page 10 to refill Water Tank.
Mineral build-up in unit. Refer to
MINERAL BUILD-UP
section on Page 12 for cleaning procedure.
Unit is spewing
water.
Water tank is overfilled. Do not fill past max line.
Mineral build-up in unit. Refer to
MINERAL BUILD-UP
section on Page 12 for cleaning procedure.
