8 English
CONNECTING TELESCOPIC POLE
The telescopic pole is made up of four sections:
SECTIONS 1, 2 & 3 are adjustable in length. By using the three extension locks,
these sections may be extended or retracted in order to achieve the desired
length.
1.
Look down inside Pole Base, and locate two guide ridges. Align two guide
grooves on Telescopic Pole with guide ridges inside Pole Base.
2.
With guide grooves aligned with guide ridges, insert SECTION 4 of Telescopic
Pole into Pole Base. Telescopic Pole should now be secured to the Pole Base.
NOTE:
If you have trouble locating two guide ridges inside Pole Base, insert
SECTION 4 of Telescopic Pole into Pole Base, then twist Pole to properly align the
guide grooves and guide ridges.
CONNECTING HOSE
1.
Align arrow on Hose with unlock icon on unit.
2.
Press hose down and turn until arrow is aligned with lock icon to lock hose into
place.
NOTE:
Do not operate unit if Hose is not in locked position
CONNECTING NOZZLE CRADLE AND CLOTHES HANGER
1.
Look down inside Pole Base, and locate two guide ridges. Align two guide
grooves on Telescopic Pole with guide ridges inside Pole Base.
2.
Align Nozzle Cradle and Clothes Hanger guide ridges with guide grooves on
SECTION 1 of Telescopic Pole. Be sure to orient Nozzle Cradle and Clothes
Hanger so that the Nozzle Cradle faces toward front of unit. This will help to
improve unit stability when heavy garments are hung from the Clothes Hanger.
3.
Slide Nozzle Cradle and Clothes Hanger onto SECTION 1 of Telescopic Pole.
Press down firmly until it fits securely in place.
ASSEMBLY
SECTION 1
(TOP)
SECTION 2
(MIDDLE-TOP)
SECTION 3
(MIDDLE-BOTTOM)
COUPLING
SECTION 4
(BOTTOM)
