14 | ENGLISH
POSSIBLE CAUSE AND SOLUTION
PROBLEM
Unit fails to heat up.
Power Light DOES
NOT illuminate.
Unit is not plugged in. Plug power cord into electri-
cal outlet.
Household circuit breaker / ground fault inter-
rupter has tripped or blown a fuse. Reset circuit
breaker / ground fault interrupter, or replace fuse.
For assistance, contact a licensed electrician.
Unit is damaged or in need of repair. Immediately
cease usage and unplug. Contact Consumer
Service for assistance.
Unit heats up, but
fails to steam.
Power Light DOES
illuminate.
Note: Always al-
low sufficient time
for unit to heat up
before pressing
Steam Button.
Water tank is empty. Refer to Filling Water Tank
procedure on Page 8.
Mineral build-up in unit. Refer to
MINERAL BUILD-
UP
section on Page 12 for cleaning procedure.
Unit is still heating up. Wait at least 35 seconds af-
ter unit is turned ON until Steam Button is pressed.
Steam output is
weak or intermit-
tent.
Mineral build-up in unit. Refer to
MINERAL BUILD-
UP
section on Page 12 for cleaning procedure.
Water level in Water Tank is running low. Refer to
Filling Water Tank
procedure on Page 8 to refill
Water Tank.
Unit is leaking
water.
Water tank is overfilled. Do not fill past MAX line.
TROUBLESHOOTING