4 | ENGLISH
not overfill unit. Do not refill unit during use. Allow unit to cool
at least 15 minutes before refilling.
- Do not attempt to use steam function without properly
filling Water Tank.
- To reduce risk of contact with hot water emitting from
steam vents, check appliance before each use by
positioning it away from body and pressing Steam Burst
Button. Do not operate unit if steam vents are blocked.
- Do not allow power cord to touch hot surfaces (such as
Ironing Plate) during use.
- Wrap cord with supplied "hook and loop" fastener when
storing.
- Always allow unit to cool completely (at least 30 minutes)
before storing. Place unit on provided Resting Plate when
cooling, to avoid heat damage to surfaces.
- The iron must be used and rested on a stable surface.
- A loose fit between wall outlet (receptacle) and plug may
cause overheating and distortion of the plug. Discontinue
use of the product in this outlet. Contact a qualified
electrician to replace loose or worn outlets.
- To reduce the likelihood of circuit overload, do not operate
another high wattage appliance on the same circuit.
- If an extension cord is absolutely necessary, a 15 amp rated
cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that
the cord cannot be pulled or tripped over.
- This appliance has a polarized plug (one blade is wider
than the other.) To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
- Use appliance only for its intended use.
