- 12 -
POWER SAVING MODE
ADJUSTING THE EXPOSURE
Press the button to
convert your image to a digital
file.
TIP: To get the best digitized
image, wait for the image
display on the LCD screen to
adjust the brightness until it
becomes stable. This normally
takes 3-4 seconds, depending
on the brightness of your film.
Note: To conserve power, the Slide and Negative Converter
will automatically enter sleep mode if you do not use it
for more than 3 minutes. You may wake up the device by
pressing any one of the buttons.
If the device is not used for more than 6 minutes, it will
turn off automatically. Press the Power button to resume
operation.
The exposure value (EV) on this device is set
automatically. However, in some situations you may want
to adjust the EV to make your image brighter or darker:
button
