FILLING THE WATER TANK
Always empty the water tank when the unit is not in use. Never store the Steam Wizard with water in the tank.
Disconnect the Steam Wizard from the wall socket before filling
the water tank.
Place the unit so that the nozzle end points downward.
Remove the cap to the water tank by twisting it counterclockwise.
Slowly pour unheated/cool water into the opening.
Leave at least
1
/
2
inch of air space in the water tank.
Replace the water tank cap by twisting clockwise until it resists
further tightening (about 1/4 turn). Do not over tighten. The
cap will “lock” into place as indicated on the opening of the tank.
Maximum water level
NOTE: If the cap is difficult to remove,
loosen by running under warm water or
use a dry towel to get a firmer grip on
the cap. Occasionally a pair of pliers may
be required to loosen the cap.
