10
DVD Code
Device Type:___________________
AUD Code
Device Type:___________________
CBL Code
Device Type:___________________
TV Code
Device Type:___________________
PROGRAMMING TV/VCR COMBO CONTROL
If you own a TV/VCR Combo, perform the following
instructions to control this device:
1.
Turn on your TV/VCR Combo and insert a
video cassette.
3.
Use the “Manufacturer’s Codes” starting on
page 24 to locate the brand name and enter
the first four-digit code for your TV/VCR
Combo. If you perform this procedure
correctly, the
AUX
key will blink twice.
NOTE:
If the
AUX
key did not blink twice after enter-
ing the codes last digit, repeat steps 2 through
3 and try entering the same code again.
If you’ve located a TV/VCR setup code that
works for your TV/VCR Combo and a separate
TV code is also listed, you’ll need to program
this code into the remote control to access vol-
ume control (see “Programming Device Con-
trol” starting on page 8).
2.
On the remote control, press
AUX
once; it will
blink once. Then press and hold
SETUP
until
the
AUX
key blinks twice.
Atlas Shaw M1055FR Rev 1 Eng only.fm Page 10 Wednesday, October 5, 2005 5:28 PM
Summary of Contents for ATLAS PVR
Page 1: ...ATLAS PVR Universal Remote Control Users Guide ...
Page 44: ...44 M11055 FS ...