16
Locking Channel Control to CBL
Now, regardless of what mode you select (except
AUD
),
the channel keys will only change channels on your cable
converter.
CHANGING VOLUME LOCK
Volume Lock allows you to control the volume through
the device identified as having your primary speaker(s),
regardless of which mode you are using. On theAtlas
PVR Universal Remote Control, Global Volume Lock is
set to
TV
, so you can control TV volume while in the
AUX
,
DVD
,
TV
or
CBL
mode. You can perform Individual
Volume Unlock on a selected device to set its volume
control for independent operation.
NOTE:
The audio mode’s (
AUD
) volume controls are
active regardless of Volume Lock settings.
However, if you lock the volume controls to
the
AUD
mode, you will have control of the
audio device’s volume in all other modes (i.e.,
AUX
,
DVD
,
TV
, and
CBL
). This can be an advan-
tage if, for example, you always listen to home
entertainment devices through your receiver’s
speakers.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1.
On the remote control, press
CBL
once; it will
blink once. Press and hold
SETUP
until the
CBL
key blinks twice.
2.
Enter
9 7 3
.The
CBL
key will blink twice.
3.
Press
CH+
once. The
CBL
key will blink twice.
1.
Assuming Global Volume Lock is active, select
a mode on the remote control that you want to
unlock (e.g.,
CBL
) and press it once. Next,
press and hold
SETUP
until the device key
blinks twice.
2.
Enter
9 9 3
. The last-selected device key will
blink twice.
Atlas Shaw M1055FR Rev 1 Eng only.fm Page 16 Wednesday, October 5, 2005 5:28 PM
Summary of Contents for ATLAS PVR
Page 1: ...ATLAS PVR Universal Remote Control Users Guide ...
Page 44: ...44 M11055 FS ...
