8
INSTALLING BATTERIES
1.
On the back of the remote control, push the
tab and lift off the battery cover.
2.
Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them.
3.
Align the cover’s keys with the case’s holes and
press the cover back into place. The tab should
click when the cover is locked.
NOTE:
When batteries need replacement, the remote
control will cease to operate. Replace the
batteries and the unit will be restored to its
full functionality, complete with your favorite
settings.
PROGRAMMING DEVICE CONTROL
The Atlas PVR Universal Remote Control is
preprogrammed to operate the cable box (converter)
provided by your cable system, an RCA TV, a Toshiba
DVD player, an RCA VCR (as an AUX device), and a
Pioneer audio receiver. To control devices other than the
default brands, perform the following steps; otherwise
skip this section.
4.
Test the remote control by pressing any mode
key (e.g.,
TV
). If the batteries are inserted
correctly, the LED (red light) will blink once.
❶
❸
❷
Atlas Shaw M1055FR Rev 1 Eng only.fm Page 8 Wednesday, October 5, 2005 5:28 PM
Summary of Contents for ATLAS PVR
Page 1: ...ATLAS PVR Universal Remote Control Users Guide ...
Page 44: ...44 M11055 FS ...