Seite 16 von 45
PERMANENTER WASSERABLAUF
Sie haben die Möglichkeit permanente Wasserabläufe zu
installieren, um nicht jedes Mal den Wassertank manuell
entleeren zu müssen, wenn Sie vorhaben das Gerät für einen
längeren Zeitraum in Gebrauch zu nehmen (oder die
Wasserpumpe ausfällt.)
Das Gerät verfügt über zwei separate Kondenswasserauslässe:
1.
Modus
ENTFEUCHTEN
MITTLERER
WASSERAUSLASS
2. Modus KÜHLEN
UNTERER WASSERAUSLASS
Bitte verwenden Sie den korrekten Wasserauslass für die
permanente Installation
. Da
die Auslässe auf den jeweiligen
Modus abgestimmt
sind
.
Um den permanenten Wasserablauf zu installieren, gehen Sie
bitte wie folgt vor:
Bevor Sie einen passenden Wasserablaufschlauch
(12.7mm) am jeweiligen Auslass anbringen, muss der
Wassertank komplett entleert sein.
Ziehen
Sie
den
Stöpsel
des
permanenten
Kondenswasserauslasses
ab
und
bringen
den
Wasserablaufschlauch an.
Das andere Ende des Schlauchs stecken Sie in ein
Auffanggefäß oder einen Abfluss, wobei der Schlauch
nicht höher als das Ablaufventil verlegt und nicht
geknickt sein darf.
Wird der permanente Ablauf entfernt, setzen Sie
unbedingt wieder den Stöpsel wieder sorgfältig ein.
HINWEIS:
Sie können auch beide Schläuche auf einmal anbringen, falls Sie diese nicht beim Wechseln
der Modi umstecken wollen.