Shelby CS-500S, Owner'S Manual

.                                                                                          .

.

.

11

18

OPERATION

3. Within 15 seconds

 of the last digit code enter, turn the

Ignition switch from 

“Off”

 to  

“ON”

.

4.

Within 15 seconds, press and release the 

valet/program switch

3

times.

5.

Turn the ignition switch to the 

“Off”

 position. 

[4] Chirps

 from the siren

or horn and 

[3] flashes

 from parking lights will indicate the system was

disarmed.

K. VALET MODE: (Disarm or Valet mode)

The 

valet/program switch

 allows you to temporarily 

bypass all alarm

functions

, eliminating the need to hand your transmitter to parking

attendants or garage mechanics. When the system is in 

“valet mode”

, all

alarm functions and remote starter functions are bypassed, however the

remote panic feature and remote door locks will remain operational. To use

the valet mode, the system must first be disarmed either by using you

remote transmitter, or by operating the manual override sequence.

To Enter Valet Mode:

1

. With the unit 

DISARMED

, turn ignition to the 

“ON”

 position.

2

. Press and hold the 

valet/program switch

 for 

2 seconds

 or until the

LED turns on. The LED will remain on and solid for as long as the system

is in 

“Valet Mode”

.

To Exit Valet Mode:

1

. Returning to normal operation, turn ignition switch to the 

“ON”

 position.

2

. Press and hold the 

valet/program switch

 for 

2 seconds

. The LED will

turn 

“OFF”

 indicating the system is 

out of

“Valet Mode”.

Remote Valet: ( Disarm or Valet mode)        Remote         Remote

Press and release the 

button

 on the trans-     

Door Lock   Door Unlock

mitter 

three times

 within 

3 seconds

 to

enter or exit valet mode

. [1] parking light

flash will confirm you have 

entered “Valet

Mode”

 and [2]parking light flashes will

confirm you have 

exited “Valet Mode”

.

Remote Transmission

In-Range Indicator

You are transmitting the signal

The system is within the

to the control unit.

remote control range.

Door Open Warning

Trunk/Hood Trigger

Doors are opened. 

Trunk or Hood is opened. 

(Zone 3)

(Zone 2)

Shock Sensor Trigger

Warn Away Trigger

Trigger on Shock Sensor 

Trigger on Shock Sensor 

(Zone 4)

(Zone 1)

Time Monitor

Alert Alarm

You have set morning call

alarm.

Count Down (Parking) Timer

Power Save Mode

Reminder when your time is

Save the battery power.

up for parking.

system is triggered.

Vibration Mode

Button Lock

Remote vibrates when the

Disable the transmission

system is triggered.

function temporarily.

Driver Paging

Low Battery

Someone is paging you in front

Your must replace the battery

of your vehicle.

in the remote control.

LCD REMOTE CONTROL TRANSCEIVER