Shelby CS-500S, Owner'S Manual

.                                                                                          .

.

.

15

14

ACTIVE ANTI CAR-JACKING:

1.

Press and hold the transmitters   and   

buttons

at the same

time

 for 

2 seconds

 while the vehicle’s ignition is 

“ON”

. The

parking lights will turn 

“ON”

 for 

1.5 seconds

 to indicate the

system is in the 

“Car-jacking Mode”

.

2.

Once the system is in 

“Car-jacking Mode”

 and you are forced

from the vehicle, the system will trigger when the door is opened

and closed while the ignition is in the 

“ON”

 position.

PASSIVE ANTI CAR- JACKING:

1.

Turn the ignition switch to the 

“ON”

 position for entering the 

“Car-

jacking Mode”

.

2

.  Once the system is in 

“Car-jacking Mode”

 and you are forced from

the vehicle, the system will trigger when the door is opened and closed

while the ignition is in the “

ON”

 position.

TRIGGER THE ANTI CAR -JACKING MODE:

a

).

50 seconds after the system has been triggered

. The siren will start

chirping for 15 seconds.

b

). 

During the 15 second period of chirping

, you must push the valet

switch once to turn off the car-jacking feature. If not, it will enter the

second timer 

Anti “Car-jacking Mode”

.

c

).

65 seconds after the system has been triggered

, the siren will start

alarming and the parking lights will continue flashing

d

). 

90 seconds after the system has been triggered

1.

The siren will continue alarming and the parking lights flashing.

2.

The starter disable will activate to prevent the vehicle from starting.

3.

This will remain active until the vehicle's battery power is diminished.

OVERRIDE THE SYSTEM TO TURN OFF ANTI CAR- JACKING:

Turn the ignition switch from the 

“OFF” to “ON”

 position, and 

within 10

seconds

 push and release the 

valet/program switch

, the siren will stop

and the system is disarmed.

Note: If you use password pin code to double protect the vehicle

security, you will need to use it to completely disarm the system.

OPERATION

P. SYSTEM’S TRIGGER CHECK

(For two-way transceiver operation only)

Press the transceiver 

F

button

 first, 

within 3 seconds

 press

the   

(C)

button

. It will respond with one melody sound and

all trigger’s records will immediately be displayed on the LCD

screen.

Note: If there is no response you are out of range.
Q. SYSTEM’S STATUS CHECK

(For two-way transceiver operation only)

When you want to check the system’s present status through

the LCD screen, press the transceiver 

F

button

twice, within

3 seconds

 press

the

   (C)button

. It will respond with one

melody sound, the LCD screen should be illuminated.

Note: If there is no response you are out of range.

OPERATION

R. DRIVER PAGING

 (For two-way transceiver operation only)

It is useful in the event that someone wants to page the driver of the parked

vehicle.

Indoor Driving Paging

Under the ignition switch “off” condition, press and hold the valet switch

for 2 seconds to page the driver, one chirp sound shall be emitted from the

vehicle and the paging melody sound continues on your Remote LCD

transceiver and “ ” indication flashes on the LCD screen.

Outdoor Driving Paging

If someone tries to page you by tapping the paging (knock) sensor (optional)

which is usually mounted on the bottom part of front window, the paging

melody sound continues sounding on your Remote LCD transceiver and “ ”

indication flashes on the LCD screen.

1. Press the transmitter 

F

 button first, within 3 seconds press

( ) 

button

to activate outdoor driver paging function, It responds with chirps of the

vehicle, a melody sound and " " indication flashes on the LCD screen

to confirm the function is on.

2. When tapping the paging (knock) sensor, one chirp sound shall be emitted

from the vehicle and the paging melody sound continues sounding on

your Remote LCD transceiver and “ ” indication flashes on the LCD

screen.

3. Turn on the ignition switch; OR press the   button to arm the system;

OR press the   button to disarm the system, this outdoor driver paging

function will exit.