12 Short Pins are used to secure legs to side bend connectors.
Working inside, beneath the cover, begin with the corners. Insert the cord of the bungee-ball through the
grommet and around the Cross Pole, then around the ball. By doing this from the inside it will hide the bungee-ball
and give a cleaner look. When all 4 corners are secured, work from side to side to get an even fit.
To secure the valence corners wrap the
upper hook and loop tie just below the elbow.
Do the same for the lower hook and loop tie.
Note: this will keep the valence from rolling up
but still allow for movement.
Page 3
5.Securing legs
6.Securing cover
