Alpy calibration - User guide
Attach the calibration module to the guiding mod-
ule, with the four screws (included in the package).
Position the calibration module in such a way
that the black foam on the screen is towards
the Alpy guiding module and the switches are at
the opposite side to the guiding camera.
Firmly tighten the four screws:
Attach the T-mount / 2” adapter to the Alpy cali-
bration module:
The instrument is now ready for installation on the
telescope (refer to the Alpy 600 and Alpy guiding user
guides):
2.3
During observations
Once the Alpy spectroscope (including the calibra-
tion module) is installed on the telescope, plug in the
power supply (middle socket).
When observing the stars, the calibration module
has no effect on your instrument and images (the
screen is outside the telescope light beam).
When observing stars, both LEDs should be
off.
10
