Sheng Jay Automation Technologies Co., Ltd.
Connecting the Black box to the Vehicle
Connect the Main Unit and the Mount Place
the groove at the top side of the main unit
against the groove area on the mount and push
until a “click” sound is heard.
Insert the Memory Card
When inserting memory cards, check to
see that the correct side of the card is
facing up before inserting into the slot.
Remove Double-sided Tape
Remove the double-sided tape attached to
the mount.
Connect the Main Unit and the Mount
Attach the device at an appropriate
position, turn the handles to adjust the
footage angle of the product so that the
camera is facing the front and the vehicle
interior. Here, heed caution so that there
are no obstructions in front of the lens.
Connect Cigarette Jack (Main Unit)
Connect the cigarette jack cable with the
main unit.
Organize Power Cable, Connect Power
Use the cable clip to organize the power
line and connect the power with the
cigarette jack socket.
Vehicle Installation Complete
After turning on the ignition, check to see
whether the device LED turns on.
Recording will start once the LED turns on
and "
Starting Infinite power recording
.”
voice guidance is provided.
• Attaching the device in a position that interferes with driver’s
field of vision or with vehicle operations could result in
accidents.
• Firmly attach the device so that it does not move or fall off
while driving.
11
