Sheng Jay Automation Technologies Co., Ltd.
Operating the Product
Event Recording
An accident, sudden braking, sudden acceleration, sudden turn, or some other form of impact on the vehicle is detected by the built-in sensor.
The ‘
Starting event recording
’ voice guidance will sound and the red LED will blink fast to indicate that an event video is being recorded. Once
event recording is complete, the green LED will blink and the device will automatically convert back to infinite recording mode.
Information :
After power is connected, the mode will always start as infinite recording mode.
(However, when the parking mode feature is turned on, the mode will start as parking recording mode if the mode before the power was turned
on had been parking recording mode.)
Manual Recording
During infinite recording, if the user wants to record a video even though there is no impact, press the [
] button. The ‘
Starting event
recording
’ voice guidance will sound and the red LED will blink fast to indicate that a manual video is being recorded. Once manual recording is
complete, the green LED will blink and the device will automatically convert back to infinite recording mode.
Parking Mode Recording is comprised of manual parking mode recording and automatic parking mode recording. For manual parking mode, the
manual parking mode setting must be enabled within Configuration. Pressing and holding the [
] button will start parking mode recording. For
automatic parking mode, the automatic parking mode setting must be enabled. Upon parking, the ‘
Starting parking recording
’ voice guidance will
sound and the orange (Red + Green) LED will blink to indicate that parking mode recording will start. In Parking mode, the recording speed is
slowed down to 5 frames to ensure recording over long periods of time.
Information :
In the case of manual parking mode recording, recording takes place in parking mode until the [
] button is pressed to cancel
mode and restore infinite recording.
Parking Mode
Recording
Parking Mode Event
Recording
Parking mode event recording is comprised of impact detection event recording and motion event recording. Impact detection event recording is
same as the impact detection event recording within infinite recording.
Motion event recording records only when movement is detected during parking.
18
