SHENZHEN CLEVER ELECTRONIC CO., LTD
SPDU2100 User Manual
Ⅰ.
Introduction
1. SPDU--- Sequential Controlling Power Distribution Unit is an intelligent product developed and produced by
CLEVER.
2. According to customer’s set of the power on/off sequence and the interval time, SPDU can realize the
sequential power on/off which can avoid the instantaneous power resulting from the current shock when many
equipments power on/off simultaneously and can meet the technical requirement of the system operation.
Ⅱ.
Function description
1.
Sequential power on/off
With the buttons, customer can set the outlets to sequential power on/off to avoid the error, interference among
equipments and power system pollution resulting from the transient current attack when many types of equipment
turn on/off at the same time.
2.
Sequential power on/off in groups
With the buttons, customer can group the outlets and let them power on/off in groups.
3.
Configure the interval time
With the buttons, customer can set the interval time of power on/off of several equipments conveniently.
4.
Controlling power on/off state of outlets
With the buttons, customer can set the power on/off state of individual outlet.
5.
Dynamic adjusting/controlling function
According to the technical requirement, customer can adjust the on/off state of individual outlet or group outlets
at times without affecting the normal operating state.
6.
Start/Stop delay function
With the start/stop delay button, customer can operate safely and accurately.
7. Immediate cut off function
Specially designed switch can cut off the power when the equipment is wrongly operated.
8.
Display the load current and voltage
Digital AC ammeter and voltage meter can accurately display the load current and voltage and their changes.
9. Display the output state
The LED can clearly display the SPDU operating state.
10.
Socket with anti-fall device
IEC320 C13 with anti-fall device makes the plug fixed and not easy to fall down.
