JZC TELECOM
Technology
JZX874 A/B Micro Power Wireless Module
SHENZHEN JZC TELECOM TECHNOLOGY CO., LTD
TEL
：
0755-86714296
Tech:0755-61319411/61319410
WEB: http://www.rfmodules.net/
Methods of operation
1. on the computer to install "JZX-USB Driver"
2. JZX874A/B between the module and the PC, select the serial port used.
3. the radio detection, when the check to the station (the software will prompt detection
success), you can read or change a single parameter.
4. change the parameters, when you select a parameter you want to set, after set up to read
again, to see the parameters of the module is not what you want
。
Note: Two or more modules to communicate, then the frequency of the station modules and air rate
must be consistent.
Module to communicate with user equipment, the module's serial port parameters and user
settings must be consistent.
Frequency
Communicated Module
JZX874A/B wireless module with all the JZX87 series of models to communicate with each other.
Communications as long as you pay attention to the following:
A. select all the modules to communicate with each other the same channel.
B. you have the same communication module of the air rate.
C. the communication module, power supply, interface connection is connected
