Shenzhen Sailwider Electronics Co., Ltd.
Page 13 of 15
When using LED sensor for the measurement, please make sure that the IMP/KWH of the meter has
been correctly set on the gateway.
4. Installation of the 2-way sensor socket
The installation of the 2-way sensor socket is quite simple. Just first plug it into a wall socket near the
target appliance, then plug the appliance into it.
5. Installation of the 2-way RF switch
The RF switch is the 2-way sensor terminal mainly used for lightings. It can be used for one light or a
group of lights or for appliances that don’t have a power plug. It detects the power consumption data from
the lightings. It also receives and implements the switching on/off instruction remotely from the gateway.
The installation of the 2-way RF switch needs to be done by an electrician. Please decide where to install
the RF switch to monitor and control, then follow below photo regarding the installation.
