Operating Instructions
3
PANEL DESCRIPTIONS
Left Side View Right Side View
1) Source Selection 2) IR Extension receiver input
3) SDI output port 4) Indicator for DC
5) Indicators for signal 6) Power Input
7) SDI input 1~4
Connecting and Operating
1. Connect 4xSDI device equipped with SDI output to 4x1 SDI switch input.
2. Connect devices equipped with SDI input (e.g monitors or video processors) to the
4x1 SDI switch output.
3. Plug power adapter into power jack.
1) This item can also work with our HDMI to SDI converter and SDI to HDMI
converter, 1x2 SDI splitter.
2) We suggest you use cable with Belden 1694A.
3) The distance depends on the quality of the SDI signal from the HD
Camera source and also the coax cable & connector.
