Operating Instructions
4) Connect the IR RX receiving cable into STP/UTP receiver IR RX and connect The IR TX cable
into HDMI splitter IR emitter.
5) Insert the DC side of 12v power supply into HDMI splitter and then connect
the AC side of the power supply into the wall outlet.
6) Turn on the power.
Attention: DIP Switch EDID setting index
Position1
Position2
Position3
Function
0
0
0
1080P stereo (Using Embedded EDID)(note 1)
0
0
1
1080P 5.1 (Using Embedded EDID)(note 2)
0
1
0
Edid auto mix, mix result is compatible with all HDMI sinks(note 3)
0
1
1
copy the first detected HDMI output's edid to the input port(note 4)
1
0
0
LC mode, 1080P stereo (Using Embedded EDID)(note 5)
1
0
1
LC mode, Edid auto mix, mix result is compatible with all HDMI sinks (note 6)
1
1
0
LC mode, copy the first detected HDMI output's EDID to the input port(note 7)
1
1
1
Fix single UTP output(note 8)
Note1:
Note1:
Note1:
Note1:
The splitter will use the embedded 1080P-stereo EDID when the DIP switch is in this
mode. The EDID will be 1080P video and stereo audio
Note2:
Note2:
Note2:
Note2:
The splitter will use the embedded 1080P-5.1 EDID when the DIP switch is in this mode.
The EDID will be 1080P video and 5.1 audio
Note3:
Note3:
Note3:
Note3:
The splitter will mix the EDID data of all HDMI sinks. And forward this mixed EDID to
the HDMI source device. The thought of EDID mixing is to enable all the connected sink device
can have video and audio they can output. For example, One TV is 1080P, stereo, another is
1080i, 5.1 audio. The mixed EDID will be 1080i, stereo audio
Note4:
Note4:
Note4:
Note4:
Copy the EDID data to the input port. It will copy the EDID data from the first detected
output port
Note5:
Note5:
Note5:
Note5:
Please refer to Note1. The only difference is that if video appears noise or interference
when the long HDMI/UTP cable is used or the quality of HDMI/UTP cable is not so good, use
this mode.
Note6:
Note6:
Note6:
Note6:
Please refer to Note 3. The only difference is that if video appears noise or interference
when the long HDMI/UTP cable is used or the quality of HDMI/UTP cable is not so good, use
this mode
Note7:
Note7:
Note7:
Note7:
Please refer to Note 4.The only difference is that if video appears noise or
interference when the long HDMI/UTP cable is used or the quality of HDMI/UTP cable is not so
4
4
4
4
