TLT-8A GPS/GSM Car Tracker Instruction Manual V1.0
28/34
5
5
5
5.... Set
Set
Set
Set timing
timing
timing
timing data
data
data
data upload
upload
upload
upload
Timing data upload has the following two modes: traveling car tracking mode and turn-off mode. In
accordance with different settings of GPS sampling time and upload quantity, data are intensively uploaded to
display real-time trace with more detail in the event of traveling car. Fewer data are uploaded to save SIM flow
charge as well as ensure some tracking effects in case of turnoff.
1>Timing
1>Timing
1>Timing
1>Timing upload
upload
upload
upload mode
mode
mode
mode for
for
for
for traveling
traveling
traveling
traveling vehicle
vehicle
vehicle
vehicle tracking
tracking
tracking
tracking
Instruction format: #805# user password# sampling interval T# uploaded data quantity each time N##
For example: #805#0000#10#6##
Description: After receiving the instruction and confirming that user password is correct, TLT-8Awill send
confirmation message to the sender “SET GPS SAMPLING TIME AND QUANTITY OK”.
Note: 1. Sampling time T takes second as unit, whose defined domain is [10, 59999]. Uploaded data item
number N for each time has a defined domain of [1, 50].
2. If data is not sent to the server due to network problem or other cause, the data will be backed up
automatically and sent to the server again after network resumes to normal.
data status is AUTO.
3. If “uploaded data quantity N for each time” is 0, the device will turn off timing upload and send
confirmation message to the sender: GPRS TIMER STOP.
2>Timing
2>Timing
2>Timing
2>Timing upload
upload
upload
upload mode
mode
mode
mode for
for
for
for parking
parking
parking
parking throttle
throttle
throttle
throttle
Instruction format: #809# user password#X#Y##
For example: #809#0000#10#6##
Description: After receiving the instruction and confirming that user password is correct, TLT-8Awill send
confirmation message to the sender “GPRS REPORT SAMPLING 2 OK”.
Note: 1. Sampling time X takes second as unit, whose defined domain is [10, 59999]. Uploaded data number
Y for each time has a defined domain of [1, 50].
2. If data is not sent to the server due to network problem or other cause, the data will be backed up
automatically and sent to the server again after network resume normal. Uploaded data format is as shown in
position information of “immediately upload current position instruction” in GPRS mode and data status is
AUTOLOW.
3. If “uploaded data quantity Y for each time” is set as 0, the device will turn off timing upload and send
confirmation message to the sender: GPRS REPORT SAMPLING 2 STOP.
4. In the above two modes, 300 pieces of data may be backed up for complementary report for blind area.
After exceeding 300 pieces, new data will automatically override former backup data.
5. When complementary data is sent, if there are lots of pieces of stored data, 50 pieces will be uploaded at
one time. If data number is less than 50, all of them will be uploaded at one time. Current data will not be uploaded
