Gateway Operation Guide
Shenzhen Winext Technology Co. Ltd.
22
Chapter 4 Common problem
4.1 The gateway cannot be bound
1.Check whether the gateway is bound by other users, if bound, need to "192.168.3.1" under
the original account to unbind,Then the new account is bound
2.Enter the "user status" column to view, "activation status", "login information" must be the
same user
4.2 GPSCannot be properly positioned
Enter gateway 192.168.3.1 interface
：
1. View the status of the location information, there is that GPS can be positioned
2. View the time synchronization information;
GPS good words, synchronization should be within 5 seconds, the figure has been
1481181742 seconds did not sync GPS.
If the GPS does not have the positioning information, re-insert the GPS antenna, or
reposition the empty area, or update the GPS antenna.
4.3 Node cannot access the network
1.Check that the gateway is working properly
2.Check if the node has electricity
3.The node is powered on again
4.4 Background cannot add / remove nodes
Check whether the gateway is online, only the gateway normal online circumstances, in the
"gateway details" to add / remove nodes
