1.3 For iOS users:
Search “WearPro” in APP Store to download, pay attention to the phone pop-up box and tap
“Agree” to give the permissions to the APP when installing;
After WearPro is installed, the application icon is shown as:
2. Connect APP through mobile phone Bluetooth
2.1 Search for Bluetooth name to connect/pair
Scroll down the watch face, find the icon "About
(
i
)
" and click it, and remember the Bluetooth
name of the watch; then open the APP WearPro, click on "Device" at the bottom bar, and click
on "Search to bind device" to start searching. Find the Bluetooth name of your watch and pair it.
If the connection is successful, the Bluetooth icon of the watch will light up green (in the middle
of the icon);
2.2 Scan QR code to connect/pair
Scroll down the watch face, find the icon "About
(
i
)
" and click it, you can see a QR code for
connection, then open the APP WearPro, click on "Device" at the bottom bar, select "Scan to
bind device", the pairing box will pop up after scanning the QR code. Click "Pair" to bind the APP
to the watch. Remember to agree to the apps notification permissions on the watch;
2.3 Connection Precautions
1) If you can't connect to the Bluetooth, see if you can find the Bluetooth name of the watch in
the mobile phone settings;
2) Check whether the permission of your mobile phone location(GPS) is enabled;
3) Whether the watch has been bound by other mobile phones;
4) Turn off the Bluetooth on the phone and turn it on again;
5) Restart the phone;
6) Go to the Bluetooth settings on your mobile phone, find the Bluetooth name of the watch,
disconnect with the watch by forgetting the device, then go to the APP to rebind.
7) Too many devices connected to the mobile phone can lead to the Bluetooth connection failure
of the watch. The number of devices that can connect to a mobile phone is limited, please stay
no more than 3 frequently use devices connected to the Bluetooth of a mobile phone.
3. Connect to the audio/calling Bluetooth of the watch:
Open the Bluetooth settings of your mobile phone, swipe to the right when the watch is on the
dial interface, click the “BT call” icon, then click "Open" to see the name of the audio/calling
Bluetooth. Find the Bluetooth name in the Bluetooth list of the phone and pair; after the
audio/calling Bluetooth is connected, the Bluetooth icon of the watch is displayed as (the outer
periphery ) lights up in blue;
Tip:
Based on this connection, make sure to tap on various APP notification synchronization
permissions in WearPro settings, to realize synchronously viewing of various messages from
mobile phone on the watch; to realize all connection functions(like making a phone call through
watch), make sure that the watch is connected to both the APP and the audio Bluetooth of the
phone.
4. Unbind Bluetooth connection from the APP
