background image

36

Licensing and Trademark 

Disclosures

DTS-HD Master Audio

This product is manufactured under license from Digital 

Theater Systems, Inc. U.S. Patent Numbers: 5,451,942; 

5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 

7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. 

and worldwide patents issued and pending. DTS is a 

registered trademark and the DTS logos, Symbol, DTS-HD 

and DTS-HD Master Audio are trademarks of DTS, Inc. © 

1996-2008 DTS, Inc. All rights reserved.

DTS-HD High Resolution Audio

This product is manufactured under license from Digital 

Theater Systems, Inc. U.S. Patent Numbers: 5,451,942; 

5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 

7,212,872; 7,333,929& other U.S. and worldwide patents 

issued and pending. DTS is a registered trademark and the 

DTS logos, Symbol, DTS-HD, DTS-HD High Resolution 

Audio and DTS-HD High-Res Audio are trademarks of 

DTS, Inc. © 1996-2008 DTS, Inc. All rights reserved.

DTS Digital Surround ES \ Neo:6 \ 96/24

This product is manufactured under license from Digital 

Theater Systems, Inc. US Patent Numbers: 5,451,942; 

5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 

7,212,872; 7,333,929 and other worldwide patents issued 

and pending. DTS, DTS Digital Surround, ES and Neo:6 

are registered trademarks and the DTS logos, Symbol, and 

DTS 96/24 are trademarks of DTS, Inc. © 1996-2008 DTS, 

Inc. All rights reserved.

Dolby True HD, Digital, Digital Plus, PL IIx

Disclosure

This product is manufactured under license from Dolby 

Laboratories. “Dolby”, “Pro Logic” and the double-D 

symbol are trademarks of Dolby Laboratories.

Dolby Volume 

This product is manufactured under license from Dolby 

Laboratories. “Dolby”, “Pro Logic” and the double-D 

symbol are trademarks of Dolby Laboratories.

Dolby® Volume provides a consistent volume level across 

all sources and content, and a reference-quality listening 

experience at any volume level. More than 40 years of 

engineering experience in noise reduction, perceptual 

audio coding, and related psychoacoustic technologies have 

resulted in the development of Dolby Volume, an advanced 

technology that provides a transparent solution to volume 

leveling and equalization. 

Dolby Volume Benefits

 

Consistent volume across all content, programs, and input 

sources

 

Reference-quality listening experience at any volume 

level

 

Eliminates need to constantly adjust volume

 

Can be adjusted to personal preference and listening 

conditions

 

Full, rich, and consistent experience at all volume levels

 

Improved surround perception at low volume levels

 

No artifacts or audible side effects

HDMI Disclosure

HDMI, the HDMI logo and High-Definition Multimedia 

Interface are trademarks or registered trademarks of HDMI 

Licensing LLC.

HDMI and how it works concerning your SR-120

In determining if all sources in the HDMI chain are 

compatible and properly licensed the SR-120 must go 

through a number of steps. It will take a few seconds for 

all this to happen. This is a limitation of HDMI and its 

HDCP license.

When the SR-120 recognizes an HDMI source the 

processor first talks to the source to determine if the source 

has an HDCP license and determines its audio and video 

capabilities. It also is able to determine the manufacturer 

of the HDMI source device.

The source then talks to the processor and then the processor 

talks to the video source. All three units must be HDCP 

compliant for HDMI to work.

The third step in this process is the video source goes 

through the processor to the display device and the display 

device goes through the processor to the video source to 

set the proper resolution for the lowest common resolution 

of the three units i.e.; If the video display is 1080p and the 

processor is set to 1080p and the video source is 720p all 

three units will set the resolution to the lowest resolution, 

which is the video source of 720p.

Summary of Contents for SR-120






































Reviews: