41
REASSEMBLY THE ENGINE
❱❘
Piston and cylinder
- Well lubricate all of the parts prior to
reassembly.
- Install the needle bearing in the connecting
rod, install the piston and the piston pin (arrow
on top of piston should face forward).
- Install the clip with the opening down.
- Install a new base gasket.
- Install the piston rings making sure they are
properly aligned, sign on the TOP.
- Install the previously prepared cylinder, use
two bolts and washers on opposite sides.
- Install the other two bolts and washers and
tighten to 40 Nm.
❱❘
Cylinder head
- Clean the mating surfaces of the cylinder and
the head.
- Install the two locating dowels on the cylinder.
- Install the cylinder head.
- Install the M8 bolts with new copper washers.
- Using a crossing pattern tighten three times to
25Nm.
25
70
40
40
70
25
M6X…
50
12
25
40
70
30
25
25
Summary of Contents for 250 SE-R 2017
