Sherex Fastening Solutions, LLC ~ 400 Riverwalk Pkwy, Suite 600 Tonawanda, NY, 14150
866-4SHEREX ~ www.sherex.com
3
Sherex Spin/Spin Inline Right Angle Rivet Nut Tool
Instructions for Use:
1. Insert head set into tool as described on page 2.
2. Turn the rivet nut onto the cap screw — 1 complete turn.
3. Insert the rivet nut into the work piece.
4. To install the rivet nut, depress the
Position 1 Button
. While the button is depressed,
squeeze the
Position 2 Lever
. When the rivet nut is completely installed the tool will stall.
5. Once the tool stalls, release the
Position 1 Button,
but continue to hold the
Position 2 Lev-
er
. The tool will reverse out of the work piece leaving the rivet nut completely installed.
The SSG 910 Series provides a quick and easy way of installing rivet nuts. This tool uses torque
to install rivet nuts so it does not need any adjustment, it is already set for the rivet nut.
If necessary, minor adjustments can be made by increasing or decreasing air pressure.
This tool is recommended for use with Sherex CAL, CAK, CAH, CAO, CPB, CFT/CAT, and
CFW/CAW rivet nuts. Feel free to contact Sherex about special applications, or use with other
rivet nut styles not listed above.
SSG-911 Dimensions
Keep
Threads
Lubricated!
Position 2
Lever
Position 1 Button
2.60
4.0
7.50
19.10
Dimensions shown in
bold
are in inches.
The other dimensions are in centimeters.
1.37
3.50
